Last updated: November 19, 2026
A misprinted check is easy to fix if you do it in the right order. Keep the bad copy. If it may have left your office, place a stop payment with your bank first. Then write VOID across it, void it in your check software with a short reason, and print a replacement with a new check number. If your bank uses Positive Pay, report the void.
The usual worries are wasted check stock, a gap in your check numbers, and two copies of the same payment getting paid. The steps below handle all three.
What Should You Do First When a Check Prints Wrong?
Stop printing and keep the misprinted check. Do not throw it in the trash. A check that printed off-center can still carry a readable account number, routing number and signature, so treat the bad copy like a real check until it is voided.
Then answer one question: has the misprinted check left your control? If it is still in your hand, the fix is simple. If it was mailed, handed to someone, or sent as a PDF, the fix needs a stop payment at your bank.
Which Fix Does Your Misprinted Check Need?
Most misprints need only a void and a new check number. You need a stop payment only when the bad copy was mailed, emailed, handed over, or lost.
| What happened | What to do | Stop payment needed? |
|---|---|---|
| Printed crooked or cut off, never signed, still on your desk | Write VOID on it, void it in your software, reprint with a new check number | No |
| Printer jammed and the sheet is torn or crumpled | Keep every piece, write VOID on it, void it in your software, reprint with a new check number | No, if you have every piece of the sheet |
| Wrong payee or amount, caught before it went out | Write VOID on it, void it in your software, reprint with a new check number | No |
| Wrong payee or amount, already mailed or handed over | Stop payment first, then void it in your software and reprint with a new check number | Yes, before you send the replacement |
| Check sent as a PDF or by email | Stop payment first, then void it in your software and send a replacement with a new check number | Yes. A PDF check can be printed more than once. |
| You cannot find the misprinted copy | Stop payment first, then void it in your software and reprint with a new check number | Yes |
How Do You Void a Misprinted Paper Check?
Write VOID in large letters across the front of the misprinted check with a dark pen, so no one can fill it in or deposit it. Our guide on how to void a check shows where to write it.
Keep the voided check, or a scan of it, with your check records, so anyone reviewing the books can see why a check number was skipped. If you keep the paper, cut out the signature area and the MICR line at the bottom. Write the check number, the date and the reason in your check register.
How Do You Void and Reprint a Check in OnlineCheckWriter.com?
In OnlineCheckWriter.com, you void the misprinted check from your payments list, then print a new check. Voiding keeps the original on record, marked as void, so your check history stays complete. The steps below show the usual path. Menu names in your account may differ slightly.
- In the left menu, under PAYABLES, click Payments Out and find your checks.
- Find the misprinted check. Click the three dots at the start of its row and, under ACTIONS, click Void.
- When the window asks if you are sure you want to void this payment, click Yes. The status changes to Void, and the check preview shows a VOIDED mark.
- Optional but useful: in the same three-dot menu, click Add Comment and type the reason, for example “Printer jam, paper copy shredded.” The comment shows in the check’s Audit Activity, along with who voided the check and when.
- Create the replacement check for the same payee and amount.
- Click Process next to the new check. Choose Print on Check Paper for check stock or Print on White Paper for plain paper, then click Yes, Continue. The check opens as a PDF in a new browser tab, ready to print.
If you also record checks in separate accounting software, void the check there too, or the bill can look paid twice and your bank reconciliation will be off.
One caution: a voided check can be restored with Unvoid, but restoring a check that was already marked printed does not make it available to print again. To replace a misprinted check, create a new one.
Should the Reprinted Check Use the Same Check Number?
Use a new check number for the reprinted check, and log the skipped number as void. A new number gives the voided check and the replacement check their own lines in your records, so nobody can confuse the two at the bank or in a Positive Pay file.
Reusing a number gains nothing. A skipped number with a note in the register is easier to explain to an auditor than two checks that share one number.
Do You Need a Stop Payment on a Misprinted Check?
You need a stop payment only if the misprinted check may have left your control. Voiding a check in software does not, on its own, stop your bank from paying it. A stop payment order does that. If your account uses Positive Pay, reporting the void to your bank can also block it.
Under UCC 4-403 (state versions and your account agreement can add their own terms):
- A stop payment order is effective for six months, and you can renew it in writing or another record your bank accepts.
- An order given by phone lapses after 14 calendar days unless you confirm it in a written or electronic record.
- The bank has to receive the order in time to act on it before it pays the check.
First, check your account activity. If the misprinted check has already been paid, a stop payment cannot undo it. Do not send a duplicate. If it paid the wrong payee or the wrong amount, contact that payee and your bank to recover the money, then pay the correct payee.
If it has not been paid, give your bank the check number and the exact amount printed on the misprinted check, to the cent, even if that amount is wrong. Add the date and payee. Our stop payment guide walks through the request. Send the replacement check only after the bank confirms the stop.
What If Your Bank Account Uses Positive Pay?
If your account uses Positive Pay, tell your bank that the misprinted check number is void, using your bank’s process for voids. Positive Pay compares each check presented against the list of checks you issued, so a voided number that stays on the list could still match.
Add the replacement check to your issued-check list the same day you print it. Our Positive Pay implementation checklist covers how voids fit into the file you send your bank.
Void, Log, and Reprint in One Place
Void a misprinted check, add the reason to its audit history, and print the replacement on check stock or plain paper.
A Worked Example: One Jammed Sheet in a Batch of 18 Checks
Example: an office manager prints a batch of 18 vendor checks, numbers 2041 to 2058, on blank check stock. The printer jams on check 2047. The sheet comes out crumpled, and check 2048 prints a quarter inch too low.
- She stops the batch and pulls both sheets. Neither check is signed, and neither left the office.
- She writes VOID across checks 2047 and 2048, cuts out the signature area and MICR line, and files them with the check records.
- In the software, she voids 2047 and 2048 and adds the comment “Jam and misalignment, paper copies voided.”
- She runs a test print on plain paper to fix the alignment, then prints the two replacements as checks 2059 and 2060.
- Her bank uses Positive Pay, so she marks 2047 and 2048 as void in the issued-check file and adds 2059 and 2060.
No stop payment is needed, because the bad copies never left her hands. Total cost: two sheets of check stock.
How Do You Keep the Next Check From Printing Wrong?
Many misprints come from the browser, the layout choice or the printer settings, not from the check paper. Run these checks before you print on check stock:
- Browser: use an up-to-date Google Chrome on a computer, and allow pop-ups so the check PDF can open.
- Layout: pick the layout that matches your paper: check on top, middle, or bottom, three per page, or wallet size.
- Paper option: choose Print on Check Paper for check stock and Print on White Paper for plain paper. The wrong option is a common cause of a shifted check.
- Printer settings: paper size Letter (8.5 x 11 in), scale Default or 100%, never Fit to page or Shrink to fit.
- Test sheet: print one check on plain paper, hold it over a sheet of check stock against a light, and print on the real stock only when the lines match.
The White Paper PDF can look upside down on screen. That is on purpose, so follow the note on the PDF page about how to load the paper.
Checks are designed to carry a magnetic MICR line at the bottom. Printing that line in magnetic ink takes MICR toner or ink, which a regular printer does not use. Ask your bank what it accepts. Our check paper and toner setup guide covers paper weight, toner and printer settings.
The Most Common Mistake With a Misprinted Check
The most common mistake is printing the check again without voiding the first one. The software then shows two live checks for the same bill, and the bank may see two checks it is willing to pay. Always void first, then reprint.
The second mistake is throwing the misprinted check in the office trash. A legible check, even a crooked one, carries your account and routing numbers. Mark it VOID, then file it or shred it.
When Is Reprinting the Wrong Fix?
Reprinting is the wrong fix when the wrong check is already with the vendor and could be deposited. In that case, call the vendor, ask them not to deposit it, place a stop payment, and only then send the replacement.
Reprinting is also the wrong fix when the problem keeps coming back. If three checks in a row print off-center, stop and fix the layout and printer settings with a plain-paper test before you use more check stock.
Your next step: check whether the bad copy left your office. If it did not, void it and reprint with a new check number. If it did, call your bank for a stop payment before you send anything.
Quick Answers About Reprinting a Check
Is it legal to reprint a check?
Yes. Reprinting a check you wrote, to replace a copy that printed wrong, is a normal part of paying bills. What matters is that only one check for that payment can be paid. Void the misprinted check, and place a stop payment at your bank if the first copy may have left your control.
What happens if both copies of a reprinted check get cashed?
If both checks are presented and no stop payment is in place, your bank will usually pay both, because each is a check you issued. You would then have to ask the payee to return the extra money. Void the misprint, stop payment when the first copy is out, and only then send the replacement check.
Does a skipped check number cause problems with my bank?
Usually not. Banks generally do not need checks to clear in number order, and gaps are common when businesses void checks. If you use Positive Pay, report each voided number so your issued-check list stays accurate. An unexplained gap can also slow down a reconciliation or an audit.
How long should I keep a voided check?
Keep it as long as you keep the rest of your check records. The IRS says to keep many tax records for at least 3 years, and some records longer, such as employment tax records for at least 4 years. Your accountant can confirm which period applies to your business.
Should I tell the vendor their check was reprinted?
Tell the vendor only if the first copy reached them or might reach them. Ask them not to deposit it, and to return or destroy it. Put a note such as Replaces check 2047 in the memo of the new check. If the misprint never left your office, the vendor does not need to know.
OnlineCheckWriter.com – Powered by Zil Money, is a financial technology company and not a bank. Banking services are provided by our partner bank, Member FDIC. FDIC insurance applies only to eligible products associated with those that have funds held in accounts at the partner bank, subject to applicable limits and requirements.
